• 3D Printed Miniatures
  • 1:12 Scale
  • 1:24 Scale
  • 1:48 Scale
• 1:48 Scale Vignettes
• 1:48 Scale Kitchens
• 1:48 Scale Kits
• Alcoves
• 1:24 Scale Kits
  • New!
  • 1:24 Scale Kitchen Collection
  • 1:24 Scale Eastlake Furniture
  • 1:24 Scale Cabin/Cottage/Country Furniture
  • 1:24 Scale Victorian Furniture
• Porch Kits
• 1:12 Scale Kits
  • 1:12 Scale Kitchen Accessories
  • 1:12 Scale Accessories
  • 1:12 Scale Children's Collection
  • 1:12 Scale Holidays
  • 1:12 Scale Pet Collection
  • 1:12 Scale Tablescapes
  • 1:12 Scale Outdoor Collection
  • 1:12 Scale Birdhouses
  • 1:12 Scale Lanterns

Click on category on left to see items in that category.
​
Click on tips for more about finishing my items.

Amazon for flush cutters

     Plastic 3D items can be painted with Tester’s plastic model paints, acrylics or permanent ink. You can then seal them if desired. They can be cut with a flush cutter or  sharp single edge razor and larger pieces can be sanded.
     White nylon plastic is the most common and is less expensive. It is a bit more flexible. Detail plastic is more expensive but can get finer details in the model. It Is mostly translucent and a bit more brittle so it can snap off the tabs easier.

For very fine details I have used a Sharpie permanent marker

Some items can be printed in  metal. This is a faucet 3D printed in a bronze finish.

I use quality Maple wood for my kits. But even so, when you paint wood it has a tendency to warp. Paint BOTH sides of the wood, even if it won’t show. This will keep warping to a minimum.

Once a kit is designed it is easy to scale up or down with the possibility of ordering kits cut in 1:12, 1:24 or 1:48 scale.

---

New Projects

 Custom Kitchens in 1:24 and 1:48 Scale